6-Hour Fast Charger 67.2V 5A XTRON

⚠️ Compatibility Notice: This charger is designed exclusively for the YUME XTRON. It is NOT compatible with any other YUME scooter models.

YUME XTRON 67.2V 5A Charger

The 67.2V 5A Charger provides reliable and efficient charging for the YUME XTRON.

Charging Time

• 1 × 5A charger: Approximately 5–6 hours for a full charge
• 1 × 5A charger + 1 × 2A charger: Approximately 4–5 hours for a full charge
• 2 × 5A chargers: Approximately 3 hours for a full charge
• 1 × 10A charger: Approximately 3 hours for a full charge

For faster charging, you can use either two 5A chargers simultaneously or a single 10A Fast Charger. One 10A charger provides the same total charging current as two 5A chargers while requiring only one charger.

Click here to purchase the XTRON 10A Fast Charger: https://www.yumescooter.com/products/3-hour-fast-charger-67-2v-10a-xtron

⚠️ Important Charging Limit

The XTRON supports a maximum total charging current of 10A. You may use:

• 1 × 5A charger
• 1 × 5A charger + 1 × 2A charger simultaneously
• 2 × 5A chargers simultaneously
• 1 × 10A charger

STRICTLY PROHIBITED:

• DO NOT use a 10A charger and a 5A charger at the same time.
• DO NOT use two 10A chargers at the same time.

Any combination exceeding the supported 10A total charging current may damage the battery or charging system.

Built-In Charging Protection

The charger includes built-in protection systems designed to help protect the charger and battery during normal use:

• Overload protection
• Over-voltage protection
• Under-voltage protection
• Short-circuit protection

Charging Status Indicator

The built-in LED indicator makes it easy to check the charging status:

• Red Light: Charging
• Green Light: Fully charged

Once the battery reaches full charge, the charger automatically stops charging.

Active Cooling System

An integrated cooling fan helps dissipate heat during charging and keeps the charger operating at a suitable temperature. This supports stable charging performance and helps extend the charger's service life.

Important Notes

• Designed exclusively for the YUME XTRON 67.2V charging system.
• Not compatible with other YUME scooter models.
• The charger is not waterproof. Keep it dry during use and storage.
• Always charge in a dry, well-ventilated area.
• Do not cover the charger while it is operating.
• Do not use the charger if the charger, cable, plug, or scooter charging port appears damaged.
• Maximum supported charging current for the XTRON: 10A total.
• Never combine a 10A charger with any other charger.

Recommended Charging Procedure

1. Connect the charger to the XTRON charging port.
2. Connect the charger to the AC power outlet.
3. Allow the battery to charge until the indicator turns green.
4. Disconnect the charger from the AC power outlet first.
5. Then disconnect the charger from the scooter.

When using two chargers (2 × 5A, or 1 × 5A + 1 × 2A), connect one charger to each charging port. The combined charging current must not exceed 10A. Never use a 10A charger together with any other charger.