Fast Charger 67.2V 5A 10A Raptor2
- Δωρεάν αποστολή για όλα τα μέρη στις ΗΠΑ
- YUME® Εγγύηση σκούτερ
⚠️ Compatibility Notice: This charger is designed exclusively for the YUME Raptor2. It is NOT compatible with any other YUME scooter models.
🚚 PRE-ORDER Estimated Shipping: Early September
Choose Your Charging Speed
This 67.2V fast charger is designed for the YUME Raptor2 and is available in 5A and 10A options.
- 5A Charger: Approx. 5–6 hours for a full charge
- 10A Fast Charger: Approx. 2.5–3 hours for a full charge
⚠️ Important Charging Limit
The Raptor2 supports a maximum total charging current of 10A. You may use:
- 1 × 10A charger, or
- 2 × 5A chargers simultaneously
DO NOT use two 10A chargers at the same time.
Using two 10A chargers would exceed the Raptor2's supported charging current and may damage the battery or charging system.
Fast & Reliable Charging
The YUME 67.2V Li-ion Battery Charger is designed to provide reliable and efficient charging for the Raptor2. Choose the 5A version for standard charging or upgrade to the 10A version for significantly faster charging when you need to get back on the road sooner.
The charger features built-in protection systems designed to help protect both the charger and battery during normal use, including:
- Overload protection
- Over-voltage protection
- Under-voltage protection
- Short-circuit protection
Charging Status Indicator
The built-in LED indicator makes it easy to check charging status:
Red Light: Charging
Green Light: Fully charged
Once the battery reaches full charge, the charger automatically stops charging.
Active Cooling System
An integrated cooling fan helps dissipate heat during charging and keeps the charger operating at a suitable temperature, particularly when charging at higher currents. This active cooling system helps improve charging stability and supports longer charger life.
Important Notes
- Designed for use with the YUME Raptor2 67.2V charging system.
- The charger is not waterproof. Keep it dry during use and storage.
- Always charge in a dry, well-ventilated area.
- Do not cover the charger while it is operating.
- Do not use a charger, cable, or charging port that appears damaged.
- Maximum supported charging current for Raptor2: 10A total.
Recommended Charging Procedure
- Connect the charger to the Raptor2 charging port.
- Connect the charger to the AC power outlet.
- Allow the battery to charge until the indicator turns green.
- Disconnect AC power first.
- Then disconnect the charger from the scooter.
For dual-port charging, the combined charging current must not exceed 10A.