3-Hour Fast Charger 67.2V 10A Xtron
3-Hour Fast Charger 67.2V 10A Xtron
3-Hour Fast Charger 67.2V 10A Xtron
3-Hour Fast Charger 67.2V 10A Xtron

3-Hour Fast Charger 67.2V 10A Xtron

€176,95
/
  • Безплатна доставка за всички части в САЩ
  • Гаранция за скутер YUME®

⚠️ Compatibility Notice: This charger is designed exclusively for the YUME Xtron. It is NOT compatible with any other YUME scooter models.

🚚 PRE-ORDER — Estimated Shipping: Late September

YUME Xtron 67.2V 10A Fast Charger

Charge your Xtron faster and spend less time waiting. The 67.2V 10A Fast Charger can fully charge the Xtron in approximately 3 hours, making it ideal when you need to get back on the road sooner.

⚠️ Important Charging Limit

The Xtron supports a maximum total charging current of 10A.

When using this 10A charger:

  • Use only one 10A charger at a time.
  • DO NOT connect two 10A chargers simultaneously.
  • Do not use another charger through the second charging port while the 10A charger is connected.

Exceeding the supported 10A charging current may damage the battery or charging system.

Built-In Charging Protection

The charger includes built-in protection systems designed to help protect the charger and battery during normal use:

  • Overload protection
  • Over-voltage protection
  • Under-voltage protection
  • Short-circuit protection

Charging Status Indicator

The built-in LED indicator makes it easy to check the charging status:

  • Red Light: Charging
  • Green Light: Fully charged

Once the battery reaches full charge, the charger automatically stops charging.

Active Cooling System

An integrated cooling fan helps dissipate heat and keeps the charger operating at a suitable temperature during high-current charging. This supports stable charging performance and helps extend the charger’s service life.

Important Notes

  • Designed exclusively for the YUME Xtron 67.2V charging system.
  • Not compatible with other YUME scooter models.
  • The charger is not waterproof. Keep it dry during use and storage.
  • Always charge in a dry, well-ventilated area.
  • Do not cover the charger while it is operating.
  • Do not use the charger if the charger, cable, plug, or scooter charging port appears damaged.
  • Maximum supported charging current for the Xtron: 10A total.

Recommended Charging Procedure

  1. Connect the charger to the Xtron charging port.
  2. Connect the charger to the AC power outlet.
  3. Allow the battery to charge until the indicator turns green.
  4. Disconnect the charger from the AC power outlet first.
  5. Then disconnect the charger from the scooter.

Наскоро разгледани